TCanji Posted January 17, 2013 Share Posted January 17, 2013 I apologize for raising this question again, but here it is: how long till EBC-R is completed?! Projection dates: Oct. 2012 / Dec. 2012 / Jan. 2013 ... are we talking weeks or months?! Just curious. In the mean time, a number of other new modules without being advertised or announced have been released and available for purchase vs. EBC-R being strongly advertised and not yet on the shelf. I am sure there are some justifiable reasons. I was in need for an OT commentary and now I regret not purchasing Tyndale. 1 Link to comment Share on other sites More sharing options...
Alistair Posted January 17, 2013 Share Posted January 17, 2013 Yes, a realistic delivery date would be most welcome, regardless of the reasons for the delay. Link to comment Share on other sites More sharing options...
Helen Brown Posted January 17, 2013 Share Posted January 17, 2013 I am told that the developer has been working full-time through all the holidays to get this finished, and is now on the penultimate volume. That means the end is in sight, but I don't want to promise another date. We will get it out ASAP. As so often happens, not only did we receive the etexts very late, but the many volumes were not uniform in their structure. This means that what has been developed for one volume does not work for the next, and so on. As for the pre-pub announcement, that was the publisher's decision. We do not normally announce modules until we can see for sure that they will be ready. 3 Link to comment Share on other sites More sharing options...
Julia Falling Posted January 17, 2013 Share Posted January 17, 2013 Thanks, Helen. Link to comment Share on other sites More sharing options...
TCanji Posted January 19, 2013 Author Share Posted January 19, 2013 (edited) Helen, thanks for your swift reply and for letting us know about the obstacles. Thanks for your efforts and endeavors in order to make EBC-R full version available. Edited January 19, 2013 by Tomi 1 Link to comment Share on other sites More sharing options...
Alistair Posted January 29, 2013 Share Posted January 29, 2013 Thanks Link to comment Share on other sites More sharing options...
Rick Bennett Posted January 29, 2013 Share Posted January 29, 2013 For those following this we're just putting the finishing touches on this and will have it ready to distribute within a couple days. Thanks for waiting patiently. 2 Link to comment Share on other sites More sharing options...
Julia Falling Posted January 29, 2013 Share Posted January 29, 2013 Thanks for updating us, Rick. Link to comment Share on other sites More sharing options...
TCanji Posted January 29, 2013 Author Share Posted January 29, 2013 Thanks Rick, great news indeed. Blessings on you and A-Team! Link to comment Share on other sites More sharing options...
circuitrider Posted January 29, 2013 Share Posted January 29, 2013 Yes, thank you for the update. That is exciting news. Link to comment Share on other sites More sharing options...
Alistair Posted January 30, 2013 Share Posted January 30, 2013 Thanks Link to comment Share on other sites More sharing options...
pjmedia Posted January 31, 2013 Share Posted January 31, 2013 For those following this we're just putting the finishing touches on this and will have it ready to distribute within a couple days. Thanks for waiting patiently. This really is good new. I, too, have been waiting for the OT section to be ready. Blessings. Link to comment Share on other sites More sharing options...
Helen Brown Posted February 1, 2013 Share Posted February 1, 2013 The complete EBC-R (version 2.0) is now posted for download in Check for Updates and in Easy Install. Link to comment Share on other sites More sharing options...
Ed Heckman Posted February 1, 2013 Share Posted February 1, 2013 That's great news! Unfortunately, it's not showing up for me at the moment. Link to comment Share on other sites More sharing options...
WGTShedd Posted February 1, 2013 Share Posted February 1, 2013 That's great news! Unfortunately, it's not showing up for me at the moment. Ditto! Link to comment Share on other sites More sharing options...
Ken Simpson Posted February 1, 2013 Share Posted February 1, 2013 Nor for me. Link to comment Share on other sites More sharing options...
rcdeacon Posted February 1, 2013 Share Posted February 1, 2013 I hate to be the bearer of bad tidings but it is NOT working for me either! Link to comment Share on other sites More sharing options...
circuitrider Posted February 1, 2013 Share Posted February 1, 2013 (edited) Try 'Check for Content Updates...' instead of 'Easy Install.' This worked for me. Edited February 1, 2013 by circuitrider Link to comment Share on other sites More sharing options...
Ed Heckman Posted February 1, 2013 Share Posted February 1, 2013 It's working now. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now