cvensel Posted April 7, 2006 Share Posted April 7, 2006 I would love to see the following references added: 1. Kistemaker/Hendriksen NT Commentary 2. Complete works of Jonathan Edwards 3. Complete writings of John Murray 4. Bavink's Reformed Dogmatics (book 3 of I think 5 has just been released) 5. Church of England's Books of Common Prayer, Lectionary, and Daily Office (Perhaps some of this could link into iCal) 6. Wayne Grudem's Systematic Theology 7. As much Martyn Lloyd-Jones as is available 8. As much JI Packer as is available 9. NIV-Spirit of the Reformation Study Bible (Richard Pratt) 10. An RC Sproul library As for language capabilities, I would absolutely love to see: 1. a way to highlight and parse only verbs (or any other "only") in the syntax window. 2. It would be great to have the syntax window exportable in an Excel spreadsheet or Word/Pages table. 3. an option for lexicons and dictionaries to open up in a panel, rather than a separate tab As for general possibilities: 1. a "reverse" or "undo" or "go back" button in the workspace 2. some kind of notepad that is not tagged to Scripture that you can copy and paste from into documents, or delete at the end of the session (Bibleworks has something similar and it is very useful) 3. an option to include citation when copying text into a document (like the widget does) Forgive me, I am new to Accordance, and if these things are possible, I'm sure I will figure them out, or workarounds in due time. I love this software! Sincerely, Charlie Vensel Link to comment Share on other sites More sharing options...
David Lang Posted April 7, 2006 Share Posted April 7, 2006 Charlie, Much of what you're wanting to do is already possible. See below. 1. a way to highlight and parse only verbs (or any other "only") in the syntax window.We don't have this option for the Syntax window, but you can do it in the Parsing window. Select text, click the Parse button, select "Set Parsing Display" from the Display menu, choose "Parts of Speech" from the Parse pop-up menu, then check the Verb checkbox. 2. It would be great to have the syntax window exportable in an Excel spreadsheet or Word/Pages table. Copy and paste works great, or you can save as a text file. Both options give you tab-delimited text, which should paste fine into a spreadsheet or Pages table. In Pages, I found that I had to set the right number of rows and columns beforehand, then select the whole table before doing Paste. If you just have one cell selected, all the text will paste into that single cell. 3. an option for lexicons and dictionaries to open up in a panel, rather than a separate tabSee this recent entry from the Accordance blog on working with Workspaces. 1. a "reverse" or "undo" or "go back" button in the workspace Go back to what? 2. some kind of notepad that is not tagged to Scripture that you can copy and paste from into documents, or delete at the end of the session (Bibleworks has something similar and it is very useful)You can create a new user tool for this very purpose. 3. an option to include citation when copying text into a document (like the widget does) Choose "Citation" from the "Copy As" submenu of the Edit menu. Hope this helps. Link to comment Share on other sites More sharing options...
Helen Brown Posted April 7, 2006 Share Posted April 7, 2006 We'll take note of your requests for modules, add them to our long list of what everybody wants.... David pre-empted me with the same answers on the features as I was writing, but much better written. Glad you love the software. We've been developing it for 14 years now, and there are not many features that haven't been suggested already. If they are not implemented it is usually because there were more important ones that we felt had to be done first. Maybe we should start offering prizes for really innovative ideas that are also widely useful. Link to comment Share on other sites More sharing options...
Robb B Posted April 7, 2006 Share Posted April 7, 2006 Prizes are a great idea! When does that begin? And I'd like to see the above resources as well, especially Lloyd-Jones, Edwards, and Murray. And while we're at it, why not add John Owen to the mix? Link to comment Share on other sites More sharing options...
cvensel Posted April 7, 2006 Author Share Posted April 7, 2006 David, Thank you...all of this helps! As I said, I am new and working my way through much of this. You mentioned that my copy/paste functions should be tab-deliminated. When I paste into Excel, etc, everything goes into one cell. I'm hoping to be able to sort. Any thoughts? Charlie Link to comment Share on other sites More sharing options...
Helen Brown Posted April 7, 2006 Share Posted April 7, 2006 Charlie: The Copy and Paste with tabs does work with the AppleWorks spreadsheet. I don't have Excel. Can anyone comment on iWorks or Excel? You can also try drag-and-drop or saving as an RTF text file. (No, drag-and-drop only works between Syntax windows, sorry.) Link to comment Share on other sites More sharing options...
cvensel Posted April 7, 2006 Author Share Posted April 7, 2006 Helen, Thanks for the info. I am trying to do this with Appleworks, but it is still all pasting one one line each entry. This is an improvement over Excel, though is it possible to have "verb", "number" , etc. appear in separate columns? And, how might I get the Greek font to show up in Appleworks? Thanks again, Charlie Link to comment Share on other sites More sharing options...
Helen Brown Posted April 7, 2006 Share Posted April 7, 2006 Only the Syntax window copies with tabs, not the Parsing (for now). Once it is in the spreadsheet you can select a column and turn the font to Helena. Appleworks does not support Unicode. Link to comment Share on other sites More sharing options...
B Tan Posted October 29, 2009 Share Posted October 29, 2009 I would love to see the following references added: 7. As much Martyn Lloyd-Jones as is available I would like to second the request for studies and sermons by Martyn Lloyd-Jones. Link to comment Share on other sites More sharing options...
Kit Posted October 29, 2009 Share Posted October 29, 2009 I would like to see the table feature in the User Tool module. Thx Link to comment Share on other sites More sharing options...
Rick Bennett Posted October 30, 2009 Share Posted October 30, 2009 Helen, Thanks for the info. I am trying to do this with Appleworks, but it is still all pasting one one line each entry. This is an improvement over Excel, though is it possible to have "verb", "number" , etc. appear in separate columns? And, how might I get the Greek font to show up in Appleworks? Thanks again, Charlie You should be able to copy/paste this info from Acc. to Excel and retain the columns. The Key, as Helen mentioned, is to select the appropriate number of columns before pasting. Below, my Syntax window had 5 columns (including 1 blank), I selected 5 columns and guessed on the number of rows and it automatically preserved everything. Double-clicking on the column divider will automatically adjust the column width to fit the text. This also worked in the Parse and List All Book Names. HTH Link to comment Share on other sites More sharing options...
Brance Posted November 3, 2009 Share Posted November 3, 2009 Charlie: The Copy and Paste with tabs does work with the AppleWorks spreadsheet. I don't have Excel. Can anyone comment on iWorks or Excel? You can also try drag-and-drop or saving as an RTF text file. (No, drag-and-drop only works between Syntax windows, sorry.) Copy and Paste from the syntax window to Number09 works great. I just select all (or whatever you want) in the syntax window, then open a numbers spreadsheet, select the field you wish to be the upper left, and paste. it will paste the info from the syntax window into the Numbers spreadsheet starting with the selected field as the upper left and putting the info into the appropriate fields from there. Couldn't be simpler. Link to comment Share on other sites More sharing options...
Rick Bennett Posted November 3, 2009 Share Posted November 3, 2009 I would love to see the following references added: 6. Wayne Grudem's Systematic Theology Not sure if you figured this out yet, but we already have this available, see here. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.