Steve Raine Posted May 30, 2009 Share Posted May 30, 2009 Hi-- How do you set NIV-G/K and NAS95S texts so that triple-clicking a word brings up the tool of your choice? I have Anchor set as top English tool, but both of these Bibles are G/K or S#-keyed: triple-clicking on "Ezekiel" (in NIV) brings up NIV-Hebrew. I know the option is here somewhere, but haven't found it. Thx, Steve Link to comment Share on other sites More sharing options...
Helen Brown Posted May 30, 2009 Share Posted May 30, 2009 The Key number texts are hard-wired to open their own dictionaries, so you cannot, in fact, change this anywhere. However, you can always use the right-click menu or the Resource palette to search for your selection in another dictionary. Link to comment Share on other sites More sharing options...
Charles Stock Posted May 30, 2009 Share Posted May 30, 2009 A while back, I changed my KJVS so that when I triple click it, Thayer's, rather than Strongs comes up as the default response to the triple click. However, I can't remember how I did it. This may be a clue for Steve getting the response he would like from the triple click action. It only is in the KJVS. The NIV-G/K, NAS95S and ESVS all do the normal default action. Link to comment Share on other sites More sharing options...
Greg Terry Posted May 30, 2009 Share Posted May 30, 2009 Not sure if this helps, but . . . I discovered that if you hold down the shift key while triple clicking in the KJVS that it will do a search in the KJ Dictionary. However, neither the NRSVS, ESVS NA95S do anyhting, but the NIV G/K opens the NIV Place Names. BTW, I was using the word Moses in my attempts to search. Is there a way to change which resource is opened in the KJVS and NIV G/K?? Link to comment Share on other sites More sharing options...
.png.c3123c857d1029f98e39c9394adc358d.png)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.