Fabian Posted November 11, 2014 Share Posted November 11, 2014 Hello (Joel) My Info Pane Cross References don't work properly. If I click on it then comes the select Vers.=all O.K. But with Command-click sometimes it brings only a few verse and sometimes an empty Pane. Greetings Fabian Link to comment Share on other sites More sharing options...
Helen Brown Posted November 11, 2014 Share Posted November 11, 2014 You do have to command-click on one of the references. Link to comment Share on other sites More sharing options...
Joel Brown Posted November 11, 2014 Share Posted November 11, 2014 Fabian - if you do Set Info Pane Display, what are your default hypertext texts? Link to comment Share on other sites More sharing options...
Fabian Posted November 18, 2014 Author Share Posted November 18, 2014 Hello Joel My default hypertext is the ELB-LEM and the second the Schlacher2K. Greetings Fabian Link to comment Share on other sites More sharing options...
Fabian Posted November 18, 2014 Author Share Posted November 18, 2014 (edited) Helen Yes cmd-click on a cross-references. I have tested it now with the NIV (2011) with G/K and I became the same empty Pane. Accordance 11.0.2 Greetings Fabian Sorry that I have even now give response, but there are so many post that I have lost my one:-) About my content I find it again. Edited November 18, 2014 by Fabian Link to comment Share on other sites More sharing options...
Fabian Posted January 16, 2016 Author Share Posted January 16, 2016 Many thanks for the ability to Click and drag to select multiple Info pane crossreferences to open at once.in 11.1.3. But my bug from the post topic still exist, and so the new feature didn't work either. Greetings Fabian Link to comment Share on other sites More sharing options...
Fabian Posted January 16, 2016 Author Share Posted January 16, 2016 Maybe a photo tells more? Greetings Fabian Link to comment Share on other sites More sharing options...
Fabian Posted January 16, 2016 Author Share Posted January 16, 2016 I had changed in the settings to NIV. Then the result was the same. Then back to Elber-Lem, but the display doesn't work properly If I click on a single one it works. So the problem is only by display multiple verses. Greetings Fabian Link to comment Share on other sites More sharing options...
Λύχνις Δαν Posted January 16, 2016 Share Posted January 16, 2016 Hi Fabian, I cannot repro. this on 11.1.3 on Mac. I don't have Schlacter 2K but set my primary text to Elberfelder 1905 and my secondary to Schlacter 1951. Simple click gets one ref from the primary text. Cmd click on one ref gets all the refs from the primary text. Click and select multiple refs gets just those refs again from the primary. It all seems to work for me. Not quite sure what to suggest. If you mouse over a ref do you see the primary text in the instant details ? If so then if you hold down the CMD key does it switch to the secondary ? I am wondering if there is something up with the CMD key detection in your setup. It's a bit of a wild guess though. thx D Link to comment Share on other sites More sharing options...
Fabian Posted January 16, 2016 Author Share Posted January 16, 2016 Hello Daniel Thanks for your answers. " I cannot repro. this on 11.1.3 on Mac. I don't have Schlacter 2K but set my primary text to Elberfelder 1905 and my secondary to Schlacter 1951. Simple click gets one ref from the primary text. Cmd click on one ref gets all the refs from the primary text. Click and select multiple refs gets just those refs again from the primary." O.K. then it seems only to my settings. " It all seems to work for me. Not quite sure what to suggest. If you mouse over a ref do you see the primary text in the instant details ?" Yes "If so then if you hold down the CMD key does it switch to the secondary ?" Yes, works too "I am wondering if there is something up with the CMD key detection in your setup. It's a bit of a wild guess though." It belongs not only the CMD, Click and select multiple too. Mmmh. All other CMD and Click actions works correct. This is the only case in which they didn't work properly. Greetings Fabian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now