Jump to content

Highlighting bug in 1.4


Daniel Wee

Recommended Posts

I think I've discovered a bug with the highlighting feature in Accordance for IOS 1.4. The problem occurs when I have two bibles open in the two text panes and tracking one another. Now, when I highlight a verse in the first pane, the second pane goes blank.

 

In my case, the top pane was NRSV while the bottom pane was KJVA. I selected and highlighted a verse in the top pane that was also displayed in the bottom pane. That causes the problem to occur. I'm pretty sure this is not supposed to happen.

 

Can some confirm this bug or suggest a solution?

 

Daniel

Link to comment
Share on other sites

An associated problem is when you highlight a verse in the second pane instead, the text location jumps to some other position rather than remaining unchanged as it should have remained.

Link to comment
Share on other sites

Daniel:

 

I am unable to reproduce this issue using the two modules you listed. Was there a particular verse that you were trying to highlight in the main or parallel pane?

 

Scott.

Link to comment
Share on other sites

I was looking at 1Maccabees. I just tried this again with NRSV 1Macc 2:19 in the top pane and KJVA showing the same in the lower pane. I pressed and held to highlight the said verse in NRSV, then selected highlight and the yellow colour. The verse was highlighted but the lower pane went blank.

 

Daniel

Link to comment
Share on other sites

I was looking at 1Maccabees. I just tried this again with NRSV 1Macc 2:19 in the top pane and KJVA showing the same in the lower pane. I pressed and held to highlight the said verse in NRSV, then selected highlight and the yellow colour. The verse was highlighted but the lower pane went blank.

 

Daniel

I am still unable to reproduce the issue, even with your specific example. So I'm going to need some more information...

 

Which iOS device you have and what iOS version are you running?

What are your text display settings (verse or paragraph, font, font size, etc.)?

Does this happen in the reading mode (all verses shown) or only when you have a set of search results shown?

Are you using the default "My Mobile Highlights" file for your highlights or a set of highlights you synced over from an Accordance for Mac installation?

 

Scott.

Link to comment
Share on other sites

I am using an iPad2 running the latest IOS 5.0.1 (as far as iTunes will update). This is the 64GB 3G model.

 

My font size in "Display Settings" are all 16 (Georgia). Not sure if it matters, the background colour is "Parchment".

 

I have not messed with My Mobile Highlights so I would assume that it is the default. I did select sync highlights though but I cannot see that it has made any difference with either this or my Mac.

 

Daniel

Link to comment
Share on other sites

I am able to reproduce and will coordinate with Scott on tracking down the issue.

Link to comment
Share on other sites

This issue has been fixed for the next release. A temporary workaround is to change the text display settings to "Separate Verses" or "Separate Verses With Space" since the issue only occurs if one of the paragraph modes is being used and the paragraph being interacted with is unusually long.

 

Scott.

Link to comment
Share on other sites

Thanks guys. Am I right that the second issue is related to the first one?

Link to comment
Share on other sites

Thanks guys. Am I right that the second issue is related to the first one?

Yes.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...